(i) What are the different methods used to increase the probability of exposure for the atomic planes with right orientation to X-rays in the X-rays diffraction studies?
(ii) Explain the principle and working of the Laue’s diffraction method. Comment on the origin of Laue spots and the utility of Laue’s diffraction pattern.
20 marks · directive: Explain
The core of a good answer
Bragg's law 2d sin θ = nλ is satisfied only for special combinations of θ and λ, so either λ is varied (Laue method with white radiation on a fixed crystal) or θ is varied (rotating or oscillating crystal method with monochromatic X-rays, and the powder method in which many randomly oriented crystallites present every orientation). In the Laue method each set of planes selects from the continuous spectrum the wavelength that satisfies Bragg's law and sends a spot to the film; a short exposure gives much structural information, so the method is used to determine crystal orientation (back-reflection Laue) and for time-resolved studies of rapid events.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
Part (i) (5 marks) asks for the strategies that make Bragg reflection possible; part (ii) (15 marks) needs the principle, experimental set-up, origin of the spots (Bragg condition) and uses of the Laue method.
Answer outline
Introduction
For a given monochromatic beam and a fixed single crystal, Bragg's law 2d sin θ = nλ is generally not satisfied by any plane, so few or no reflections appear. Methods differ in which variable they scan.
(i) Methods
- Laue method: single crystal in a continuous (white) X-ray spectrum; λ varies, so the crystal need not be turned
- Rotating (or oscillating) crystal method: single crystal on a goniometer rotated step by step in monochromatic X-rays; θ varies, so planes pass through their Bragg angles
- Powder (Debye-Scherrer) method: fine powder in monochromatic X-rays; every crystallite orientation is represented, producing diffraction rings
- Powder diffractometers tilt the sample by θ while the detector moves through 2θ (Bragg-Brentano geometry)
(ii) Principle
- Laue (1912) showed that crystals diffract X-rays (Nobel Prize 1914); Bragg's law 2d sin θ = nλ applies to each lattice plane
- A fixed crystal presents fixed θ for each plane (hkl); with a continuous spectrum (λ_min to λ_max) each plane picks the λ that satisfies the condition
(ii) Working
- Polychromatic beam from an X-ray tube, collimated into a narrow beam
- Single crystal mounted on a goniometer head
- Transmission geometry: film behind the crystal; back-reflection geometry: film on the source side, used when the sample is too thick for X-rays to pass through
- Exposed film or area detector records a pattern of spots
(ii) Origin of Laue spots
- Each spot is a reflection from one set of planes (hkl), including higher orders from the same planes at λ/n
- In von Laue's 1912 photograph the plate showed spots of roughly elliptical shape
(ii) Utility
- Determines crystal orientation (back-reflection Laue photographs interpreted with a Greninger chart)
- A short exposure yields much structural information, so it suits time-resolved studies of very rapid events
- Less suited than monochromatic methods to full structure determination; works best for crystals with simple atomic arrangements
Conclusion
Varying λ (Laue) or θ (rotating crystal, powder) makes Bragg reflection possible; Laue spots are white-beam Bragg reflections from individual plane families and are mainly used for orientation and fast time-resolved work rather than full structure determination.
Facts to remember
- Bragg's law: 2d sin θ = nλ.
- Laue method: single crystal, continuous X-ray spectrum; discovered by von Laue in 1912 (Nobel Prize 1914).
- Powder method: monochromatic X-rays, all crystallite orientations represented, diffraction rings.
- Back-reflection Laue photographs are used for thick samples and for determining crystal orientation.