Pratidin

UPSC Mains Civil Engineering Optional Paper II previous-year questions

30 Mains Civil Engineering Optional Paper II questions from 2026 to 2026, with the official answer where UPSC has published one, an explanation or answer outline, and the news stories that connect to each. Every question is checked against the published paper.

2026

  1. 2026 · Civil Engineering Optional Paper II · 10 marksMains

    Explain with a neat sketch the essential features of English bond in brick masonry construction.

  2. 2026 · Civil Engineering Optional Paper II · 10 marksMains

    State the conditions under which one would best recommend the following types of cements. Also, state the reasons behind them. (i) Portland Pozzolana Cement (ii) Rapid Hardening Cement (iii) Quick Setting Cement (iv) Low Heat Portland Cement (v) Air-entraining Cement

  3. 2026 · Civil Engineering Optional Paper II · 10 marksMains

    A concrete vibrating equipment is purchased for ₹ 80,000 and the assumed life is 10 years with a scrap value of ₹ 20,000. If the depreciation is charged by the ‘Diminishing Balance Method’, then calculate the percentage by which the value of the equipment is reduced every year and also calculate the depreciation fund after 2 years.

  4. 2026 · Civil Engineering Optional Paper II · 10 marksMains

    What is the purpose of providing a Marshalling Yard ? Discuss various types of Marshalling Yards.

  5. 2026 · Civil Engineering Optional Paper II · 10 marksMains

    Discuss the key steps involved in flexible overlay design over flexible pavement using the Benkelman Beam Deflection method. Explain why, when and how, various corrections are applied in the process of overlay design.

  6. 2026 · Civil Engineering Optional Paper II · 15 marksMains

    A vertical curve is formed when a descending gradient of 0·5% meets another descending gradient of 3·0%. Find the length of the vertical curve to provide the required (i) stopping sight distance, and (ii) overtaking sight distance, for a design speed of 65 km/hr. Assume the coefficient of longitudinal friction as 0·35 and the acceleration as 3·6 km/hr/sec. Assume other necessary data suitably.

  7. 2026 · Civil Engineering Optional Paper II · 15 marksMains

    In running fly levels from a benchmark of RL 381·605, the following readings were obtained : Backsight 2·215, 1·030, 1·595, 1·655 Foresight 1·025, 3·290, 2·385 From the last position of the instrument, four pegs at 50-metre intervals are to be set out on a uniformly falling gradient of 1 in 100; the first peg is to have an RL of 380·500. Work out the staff readings required for setting the tops of the pegs on the given gradient.

  8. 2026 · Civil Engineering Optional Paper II · 20 marksMains

    A project plan consisting of the following activities, their interconnectivity and their durations are listed in the following table : Activity (i-j) | Duration (t) (Days) 1-2 | 10 1-3 | 12 2-5 | 8 2-7 | 12 3-4 | 6 3-6 | 5 4-5 | 8 5-6 | 8 5-7 | 10 6-7 | 6 7-8 | 12 Draw the network diagram and determine the critical path for the above project. Also, determine the activity times and the total float for each activity.

  9. 2026 · Civil Engineering Optional Paper II · 20 marksMains

    What do you understand by a Gantt or Bar chart with respect to construction project management ? Explain it with a neat sketch and discuss the limitations of Bar chart with suitable examples.

  10. 2026 · Civil Engineering Optional Paper II · 10 marksMains

    Explain with a neat sketch how vibration during the placement of concrete affects the compressive strength development of concrete, which is inversely dependent on the water-cement ratio. Also, state the advantages of inducing vibration to fresh concrete.

  11. 2026 · Civil Engineering Optional Paper II · 15 marksMains

    A BG track comes across a curve of radius 1000 m. The equilibrium cant is provided considering a speed of 90 km/hr. Calculate the maximum and minimum permissible speeds on the track if the limiting values of cant deficiency and cant excess are 75 mm each.

  12. 2026 · Civil Engineering Optional Paper II · 5 marksMains

    Define remote sensing. State how it differs from photogrammetry.

  13. 2026 · Civil Engineering Optional Paper II · 10 marksMains

    What do you understand by the effective CBR value ? Discuss its significance. How is it calculated as per the latest IRC guidelines ?

  14. 2026 · Civil Engineering Optional Paper II · 10 marksMains

    List the various applications of Origin and Destination (O&D) Studies.

  15. 2026 · Civil Engineering Optional Paper II · 10 marksMains

    With respect to the chemical admixtures that are added to concrete, briefly differentiate ‘Accelerators’ from ‘Retarders’, and also explain how they modify the properties of concrete.

  16. 2026 · Civil Engineering Optional Paper II · 10 marksMains

    What is the creep for hardened concrete ? With a neat sketch, draw the time-versus-deformation diagram of hardened concrete.

  17. 2026 · Civil Engineering Optional Paper II · 10 marksMains

    What is the difference between a flood hydrograph and a mass curve ? Using the following data of a river at a dam site, construct and plot a flood hydrograph and find the values of minimum and maximum discharge in the river. Month | Flow (m³/s) January | 110 February | 120 March | 130 April | 140 May | 150 June | 160 July | 180 August | 210 September | 170 October | 140 November | 110 December | 100

  18. 2026 · Civil Engineering Optional Paper II · 10 marksMains

    A catchment has six rain gauge stations. The annual rainfall recorded by the gauges in a year is as follows : Station | A | B | C | D | E | F Rainfall (cm) | 82.7 | 102.9 | 180.3 | 110.3 | 95.8 | 136.70 (i) Determine the standard error in the estimation of mean rainfall in the existing set of rain gauges. (ii) For a 10% error in the estimation of mean rainfall, calculate the optimum number of rain gauge stations in the catchment.

  19. 2026 · Civil Engineering Optional Paper II · 10 marksMains

    A 30 cm diameter well penetrates 25 m below the static water table. After 24 hrs of pumping @ 5400 l/min, the water table in a test well 90 m away is lowered by 0.53 m and in another well 30 m away, the drawdown is 1.11 m. What is the transmissivity of the aquifer ?

  20. 2026 · Civil Engineering Optional Paper II · 10 marksMains

    Determine the theoretical oxygen demand (ThOD) for glycine [CH₂(NH₂)COOH] using the following assumptions : (i) In the first step, the organic carbon and nitrogen are converted to carbon dioxide and ammonia respectively. (ii) In the second and third steps, ammonia is oxidized sequentially to nitrite and nitrate. The ThOD is the sum of the oxygen required for all three steps.

  21. 2026 · Civil Engineering Optional Paper II · 20 marksMains

    The following information is available regarding the relationship between trap efficiency and capacity-inflow ratio for a reservoir : Capacity-Inflow Ratio | Trap Efficiency 0.1 | 87 0.2 | 93 0.3 | 95 0.4 | 95.5 0.5 | 96 0.6 | 96.5 0.7 | 97 0.8 | 97.2 0.9 | 97.3 1.0 | 97.5 Find the probable life of the reservoir with an initial reservoir capacity of 30 million cubic metres, if the annual flood flow is 60 million cubic metres and average annual sediment inflow is 360000 tonnes. Assume a specific weight of sediment equal to 1200 kg/m³. The useful life of the reservoir will terminate when 80% of initial capacity is filled with sediment.

  22. 2026 · Civil Engineering Optional Paper II · 8 marksMains

    How does the variation of sewage flow affect its velocity in a circular sewer ?

  23. 2026 · Civil Engineering Optional Paper II · 7 marksMains

    If 20 mL of an odorous water sample is diluted with 180 mL of odour-free water to make a 200 mL mixture where the odour is just detectable, determine the threshold odour number of this water sample. Give your comments on acceptability of this sample from the consumer point of view. The odour sensitivity of an individual varies, so what may be the correct procedure and method to carry out an odour test ?

  24. 2026 · Civil Engineering Optional Paper II · 20 marksMains

    A sedimentation tank is treating 5 million litres of sewage per day containing 250 ppm of suspended solids. The tank removes 60 percent of the suspended solids. Calculate the quantity of sludge produced per day in bulk (volume) and weight, if the : (i) moisture content of the sludge is 97 percent, (ii) moisture content of the sludge is 96 percent, and (iii) specific gravity of the wet sludge is 1.02. Calculate the volume of sludge produced for both moisture contents and the percentage reduction in volume of sludge produced for 1.0 percent reduction in moisture content (wet sludge).

  25. 2026 · Civil Engineering Optional Paper II · 15 marksMains

    Draw a neat sketch of a diversion work (headwork). Briefly explain the functions of the following : (i) Silt excluder (ii) Cross regulator (iii) Canal fall (iv) Aqueduct (v) Escape

  26. 2026 · Civil Engineering Optional Paper II · 5 marksMains

    Classify the following hydraulic devices based upon their mode of operation : (I) Aqueduct (II) Super passage (III) Falls (IV) Barrage/weir (V) Dams

  27. 2026 · Civil Engineering Optional Paper II · 15 marksMains

    Explain Lacey’s silt factor. If the value of this factor is 1.0, what does it indicate ? The longitudinal slope of a canal running in an alluvial soil is 1/5000. Design the canal section and also find discharge (Q). Take Lacey’s silt factor, f = 0.90 and the canal side slope as ½ H : 1 V.

  28. 2026 · Civil Engineering Optional Paper II · 5 marksMains

    What are the effects of waterlogging ?

  29. 2026 · Civil Engineering Optional Paper II · 15 marksMains

    Consider a thermoelectric power plant of 1000 Mega Watt capacity with a load factor of 70 percent and an efficiency of 42 percent. Determine pollutants emitted on an annual basis such as particulates, carbon dioxide, and sulphur dioxide, if coal is used as fuel. The ultimate analysis and calorific value of the coal used are as follows : Moisture | Ash | Carbon | Hydrogen | Nitrogen | Sulphur 8% | 7% | 78% | 2% | 2% | 1% Oxygen | Calorific Value | Fly ash 2% | 30 Mega Joules/kg | 77% of ash Assume complete combustion as per the stoichiometric equation and no air pollution control device. If an electrostatic precipitator is installed which removes 99% of particulates, compute the amount of particulate emissions.

  30. 2026 · Civil Engineering Optional Paper II · 15 marksMains

    Enumerate the key additions in the Solid Waste Management Rules, 2026 in comparison with the Solid Waste Management Rules, 2016 in India, to emphasize that it is a paradigm shift.